Industrial Computing Solutions Fan-less Computer NISE ... - Omtec

Chapter 4: BIOS Setup Advanced The Advanced menu allows you to configure your system for basic operation. Some entries are defaults required by the system board, while others, if enabled, will improve the performance of your system or let you set some features according to your preference. Main Setting incorrect field values may cause the system to malfunction. Advanced Settings BIOS SETUP UTILITY Advanced Boot Chipset PCIPnP WARNING: Setting wrong values in below sections may cause system to malfunction. IDE Configuration USB Configuration ACPI Configuration SuperIO Configuration Hardware Health Configuration Security Configure the IDE devices(s). Exit USB Configuration This section is used to configure USB devices. ACPI Configuration This section is used to configure the Advanced ACPI configuration. Super IO Configuration This section is used to configure the I/O functions supported by the onboard Super I/O chip. Hardware Health Configuration This section is used to configure the hardware monitoring events such as temperature, fan speed and voltages. Onboard LAN 1 and Onboard LAN 2 Onboard LAN 1 Onboard LAN 2 Onboard LAN Boot ROM IDE Configuration [Enabled] [Enabled] [Disabled] v02.61 (C)Copyright 1985-2006, American Megatrends, Inc. This section is used to configure the IDE drives. ← → ↑↓ Enter F1 F10 ESC Select Screen Select Item Go to Sub Screen General Help Save and Exit Exit This section is used to enable or disable the onboard LAN. Onboard LAN Boot ROM Enable this field if you wish to use the boot ROM (instead of a disk drive) to boot-up the system and access the local area network directly. If you wish to change the boot ROM’s settings, type the and keys simultaneously when prompted during boot-up. Take note: you will be able to access the boot ROM’s program (by typing + ) only when this field is enabled. Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. 55 <strong>NISE</strong> 2100, <strong>NISE</strong> 2100A, <strong>NISE</strong> 2110, <strong>NISE</strong> 2110A User Manual

Chapter 4: BIOS Setup IDE Configuration This section is used to configure the IDE drives. BIOS SETUP UTILITY Advanced IDE Configuration ATA/IDE Configuration [Enhanced] Configure SATA as [IDE] Primary IDE Master : [Not Detected] Secondary IDE Master : [Not Detected] Third IDE Master : [Not Detected] IDE Detect Time Out (Sec) [35] Disabled Compatible Enhanced Primary IDE Master to Third IDE Master When you enter the BIOS Setup Utility, the BIOS will auto detect the existing IDE devices then displays the status of the detected devices. To configure an IDE drive, move the cursor to a field then press . IDE Detect Time Out (Sec) Selects the time out value for detecting ATA/ATAPI devices. ← → Select Screen ↑↓ Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.61 (C)Copyright 1985-2006, American Megatrends, Inc. ATA/IDE Configuration This field is used to configure the IDE drives. The options are Disabled, Compatible and Enhanced. Configure SATA As IDE AHCI This option configures the Serial ATA drives as Parallel ATA physical storage device. This option configures the Serial ATA drives to use AHCI (Advanced Host Controller Interface). AHCI allows the storage driver to enable the advanced Serial ATA features which will increase storage performance. Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. 56 <strong>NISE</strong> 2100, <strong>NISE</strong> 2100A, <strong>NISE</strong> 2110, <strong>NISE</strong> 2110A User Manual