Table of Contents
Advertisement
8.9.3. Communication with Personal Computer
This section describes the way to back up the parameters of EDC Driver Unit to a personal
computer using Hyper Terminal, which is a bundled program with the Windows
The user must provide the communication cable. Refer to "Appendix 6: Wiring of RS-232C
Communication Cable" for wiring of the cable.
For pin arrangement, refer to "2.8.1. CN1: RS-232C Serial Communication Cable Connector"
and the instruction manual of your personal computer.
8.9.3.1. Setup of Hyper Terminal
1)
Start Hyper Terminal
2)
The dialog box for "Connection Description" appears.
The dialog box for " COM Properties" appears.
3)
Table 8-40: specification of RS-232C communication
4)
Closing Hyper Terminal.
The dialog box that asks "Do you wand to save session
Click [Yes] to store the session. Use this session for communication with the Driver Unit
afterwards
◊ The pin arrangement for RS-232C connector of EDC Driver Unit is different from that
of DOS/V machines.
◊ An optional communication cable M-C003RS031] is available from NSK Ltd.
◊ For a personal computer that does not provide the COM port, you can use the USB port
instead. In such a case, use an RS-232C and USB gender bender for communication.
One of usable adapter "USB serial cable SRC06-USB" is available from Arvel Co.
◊ Specify it in the order of [Start] → [Programs] → [Accessories] →
[Communications].
◊ Declare the name of connection and set an icon, then click [ OK ] button.
◊ Set the number of COM port used for "Connection using."
◊ Input required data following the table below and click [OK] button.
Item
Bits per second.
Data bits
Parity
Stop bits
Flow control
Specification
9 600
8
None
2
Hardware
— 8-62 —
TM
?" appears.
.
- Quick Links:
- Warning F5: Program Error
Hide quick links:
Advertisement
Table of Contents
